Concrete Spraying Machine
Product description: 1, the accelerator is added as an independent conveying unit, which can be accurately measured by the metering pump, and can be adjusted at will; 2, the inside shell of the cyclone is lined with a special rubber bush, which is not stick by the vibration of the wind pressure,...
Mortar spraying machine is mainly used for mixing mortar, putty powder, refractory coating and pressure grouting on the inner and outer walls of buildings.
The working principle is to feed cement or other products into the feeder, and stir the slurry under the action of the screw pump, continuously discharge by pressure, and transport forward along the pipeline. After reaching the nozzle, the wind is introduced, and the slurry is under the action of the wind. , the spray is formed and sprayed on the wall surface.
Maximum transportation distance（m）
Applicable water cement ratio
Setting amount of accelerator（%）
Maximum bone diameter（mm）
Sand blasting tube diameter（mm）
operation wind pressure（Mpa）
blast consumption （m³/min）
main motor+Vibration motor（kw）
1, the accelerator is added as an independent conveying unit, which can be accurately measured by the metering pump, and can be adjusted at will;
2, the inside shell of the cyclone is lined with a special rubber bush, which is not stick by the vibration of the wind pressure, and the inner hole of the material sleeve is smooth, which is favorable for the conveying of the material;
3, the utility model has the advantages of stable performance, convenient operation, low energy consumption, long service life, etc., and can protect the environment and improve the quality of the spraying layer.