Categories

Contact Us

Shenzhen One Best Industrial Co., LTD

Address:Shenzhen, Guangdong, China (Mailand)

Phone: +86-755-84186491

Mobile: +8613822291174

WeChat: +8613822291174

WhatsApp:+8613822291174

QQ: 2653054199

E-mail: info@sz-manufacturer.com

Portable Tig Welder

Portable Tig Welder has a good load continuation rate.
Its small size, light weight and easy operation make it suitable for all kinds of welding places.
Its static external characteristic is a falling characteristic.

Product Details

Product description:

Portable Tig Welder has a good load continuation rate.

Its small size, light weight and easy operation make it suitable for all kinds of welding places.

Its static external characteristic is a falling characteristic.

Its welder has overvoltage protection, undervoltage protection, overtemperature protection and overcurrent protection.

It has a high-frequency arcing function and is easy to start the arc.

Parameter

Model

WS/TIG-200

WS/TIG-250

Rated input voltage /frequency

Single Phase 220V±15%

Rated input capacity (KVA)

7.5

8.8

Rated input current (A)

11.4

13.4

Rated duty cycle (%)

60

Output current range (A)

10-200

10-250

Output no load voltage (V)

56

56

Output current range (A)

10-160

10-230

Exterior size L x W x H (mm)

450x270x335

450x270x335

Weight(kg)

8

8

Portable Tig Welder Maintenance Methods

The power switch indicator is on, the fan is turned or stopped repeatedly, and there is no welding output.

1) 380V power input may be wrong, causing the overvoltage protection circuit to start, change to 220V power supply, restart.

2) The 220V power supply is unstable (input line or too long) or the input lines overlap in the power grid, causing the overvoltage protection circuit to start. Increase the input line grid diameter or tighten the input line node. This phenomenon recovers after 2-3 minutes after restart.

3) Continuously turn the power switch on and off in a short time, causing the overvoltage protection circuit to start, shut down, and wait for 2-3 minutes to restart.

4) Loosen and retighten the wires between the switches on the power strip

5) The main circuit of the power board, 24V relay is not attracted or damaged, check 24V power box, relay, if the relay is damaged, the model can be replaced by other electrical equipment

Hot Tags: portable tig welder, China, manufacturers, suppliers, factory, wholesale, cheap

Inquiry

Related Products